Information:-

• The Breqco mini anesthesia gas machine (portable trolley mounted) is a continuous flow anesthesia system ideally suited for the induction room, procedure room, or a minor theater. 
• It has been designed to meet the ever-increasing demands of modern & busy practicing anesthesiologists, where compactness and space-saving are required.

•  A totally indigenous product with prompt after-sales service.

    The Standard Equipment  Includes:-

• Two gas rotameter, for oxygen & nitrous oxide, with fine adjustment control & color-coded knob and luminous backplate, oxygen flowmeter calibrated from 100cc/min to 10 liters/min. & nitrous oxide flowmeter from 200cc/min. to 12 liters/min, downstream receipt of oxygen.

• One Goldman-type vaporizer for halothane was supplied as standard. Provision to mount two vaporizers at a time.

• Non-return cum blow-off valve in circuit ensures pressure does not built-up beyond 200cm. water column & minimizes the risk of backflow gases.
• One pin indexed yoke with the pre-set regulator for oxygen & one for nitrous oxide with indicator gauge in modal MVA-12 as in figure-1 and two pins indexed yoke with pre-set regulators for oxygen and two for nitrous oxide in basic modal as in figure-2.
• Self-sealing valve attachment for additional oxygen source from bulk cylinder/ central pipeline/ medium size cylinder.
  

• Auto N2O cut - Nitrous oxide supply interlocked with oxygen, making it impossible for the nitrous to be administered to the patient in the absence of oxygen supply in yokes.

• Overhead shelf for a monitor at eye level.
• Emergency drug trays (bins) are fitted in a convenient place.

• The instrument tray is made of stainless steel.
• Emergency oxygen unit with the fresh gas outlet at a convenient position.
• One open circuit (Bain's circuit).

• Space for two additional medium size cylinders at the rear is provided in mva-12. Instead of back provision, two additional yokes (one each for oxygen and nitrous oxide) are provided in the basic modal. 

• Total four cylinders attachment in both the modals.

• Table structure constructed from sturdy square stainless steel/m.s. and electrostatically powder-coated.

• The equipment is fitted with a spacious drawer on four antistatic castor wheels for easy mobility.